• (PDF) Magnetic and Structural Properties of FeCr Alloys

    We find soft-magnetic properties for FeCr, FeMn while for FeCo and FeNi hard-magnetic are predicted. In particular, for the family of FeNi, a candidate structure with energy lower than the ...

  • US6599376B2 - FE-CR soft magnetic material and a method of ...

    A Fe-Cr soft magnetic material has electric resistivity not less than 50 μΩcm and a metallurgical structure occupied by a ferrite phase at a surface ratio of 95% or more. A number of fine precipitates of 1 μm or less in particle size is controlled at a ratio not more than 6×10 5 /mm 2 . The Fe-Cr alloy has the composition (expressed in mass or weight %) of C up to 0.05%, N up to 0.05% ...

  • Cited by: 18
  • Magnetic and structural properties of FeCr alloys.

    Dec 07, 2007  Magnetic and structural properties of FeCr alloys. Froideval A(1), Iglesias R, Samaras M, Schuppler S, Nagel P, Grolimund D, Victoria M, Hoffelner W. Author information: (1)Paul Scherrer Institute, Nuclear Energy and Safety, 5232 Villigen PSI, Switzerland.

  • Cited by: 63
  • Soft Magnetic Alloys on sales - Quality Soft Magnetic ...

    Soft Magnetic Alloys, You can Buy good quality Soft Magnetic Alloys , we are Soft Magnetic Alloys distributor Soft Magnetic Alloys manufacturer from China market. ... Strip Bar Plate Wire Tube Plate Capillary Forging Suzhou A-one Special Alloy Co. Ltd is a professional manufacturer of high ... Read More. 2018-09-29 10:18:11. HYMU80 Soft ...

  • Critical magnetic properties of Fe-Cr alloys - ScienceDirect

    329 CRITICAL MAGNETIC PROPERTIES OF Fe-Cr ALLOYS* A.T. ALDRED Argonne National Laboratory, Argonne, Illinois 60439, USA and J.S. KOUVELt University of Illinois, Chicago, Illinois 60680, USA Detailed magnetization-field-temperature measurements on Cr-rich Fe-Cr alloys near their ferromagnetic Curie points reveal anomalous values for the critical exponents.

  • Cited by: 10
  • Soft Magnet - an overview ScienceDirect Topics

    FeCo soft magnetic steels (Chen 1986) have evolved under the tradenames Permendur, Supermendur and Hiperco (Hiperco50 is a tradename of CarpenterTechnology).Fe–Co alloys exhibit the largest magnetic induction of any material, at composition near the peak in the well-known Slater–Pauling curve.

  • Soft Magnetic Alloys - Engineered Materials Solutions

    Download Our Soft Magnetic Iron Nickel Alloys Data Sheet . Soft Magnetic Iron-Nickel-Alloys 2017.pdf 124 Kb; Chemical Composition. Download our Data Sheet for a more detailed chemistry. Normaperm (FeNi36) Nifemax (FeNi48) FeNi77CuMo. FeNi80Mo. Contact us for more information. North America.

  • Journal of Alloys and Compounds - Elsevier

    General Perspective - The Journal of Alloys and Compounds is an international peer-reviewed medium for the publication of work on materials comprising compounds as well as alloys. Its great strength lies in the diversity of disciplines which it encompasses, drawing together results from materials science, physical metallurgy, solid-state chemistry and physics.

  • Soft Magnetic Alloys on sales - Quality Soft Magnetic ...

    Soft magnetic alloy Permalloy strip thickness 0.02 x 100mm semihard condition OhmAlloy-1J79 (Soft magnetic alloy) (Common Name: Ni79Mo4, E11c, malloy, permalloy, 79HM) Ohmalloy-1J79 is a nickel–iron magnetic ...

  • A Simplified Method of Selecting Soft Magnetic Alloys

    Soft magnetic alloys are materials that can be easily magnetized - thus exhibiting high permeability - and just as easily demagnetized. In general, high permeability allows the design of smaller, more efficient components. Several factors have a bearing on the soft magnetic alloy choice.

  • Soft Magnetic Alloys

    Soft Magnetic Alloys. Soft magnetic material includes a wide variety of nickel-iron and nickel-cobalt soft magnetic alloys and pure iron for high performance components requiring high initial and maximum permeability coupled with ease of fabrication.. Sophisticated equipment, advanced technology and the expertise developed for producing aeronautical grade alloys are employed for manufacturing ...

  • Soft Magnetic Alloys - Nicofe Materials

    Soft Magnetic Alloys ASTM A753 Type 4 – Alloy 79 Consisting of 80% Nickel, 5% Molybdenum, and the balance Iron, this alloy is used where maximum permeability and extremely high initial permeability is required, along with minimum hysteresis.

  • Soft Magnetic Nanocrystalline Alloys: Materials and Models ...

    The latest addition to the families of soft magnetic nanocrystalline alloys is the NANOMET alloy, with typical composition Fe 83.3–84.3 Si4B8P 3–4 Cu 0.7. 22 NANOMET was developed to increase the saturation magnetization and minimize material cost by reducing or eliminating the metallic additions of Nb, Zr, Mo, and Cu which were usually ...

  • Soft magnetic FeCo alloys - MAFIADOC.COM

    The degradation of magnetic properties with plastic deformation is also observed in other soft magnetic materials like non-grain oriented Fe–Si alloy.152 Nevertheless, compared to an Fe–Si alloy, the magnetic properties of FeCo–V alloys are more sensitive to mechanical strengthening and are attributed to its high saturation ...

  • Denture attachment - Aichi Steel Works, Limited

    May 07, 1991  The denture attachment as set forth in claim 3, wherein the end plates are formed essentially of a corrosion-resistant soft magnetic alloy containing, by weight, up to 0.03% of C, 11 to 30% of Cr and up to 4% of Mo, and the spacer and the cap are each formed essentially of Ti, a Ti alloy or a non-magnetic stainless steel containing up to 0.03% ...

  • Properties of soft magnetic Fe-Co-V alloy produced by ...

    alloy while still retaining good magnetic properties. The traditional manufacturing method of stacking insulated sheets to build up a component includes many processing steps, such as casting, rolling and heat treatment, which increase the manufacturing cost (Chen et al.,2015). Soft magnetic components are also manufactured by compacting the alloy

  • Fe-Ni Soft Magnetic Alloy - Suzhou Nickel Alloy Co., Ltd

    Soft magnetic alloys are NiFe alloys that contain from about 35 to 81% of nickel. These alloys are using in applications requiring the following characteristics: high permeability, high saturation magnetostriction, low hysteresis energy loss,low eddycurrent loss in alternating flux, low curie

  • Carpenter - Soft Magnetic Alloys with Improved Corrosion ...

    Soft magnetic alloys with improved corrosion resistance have been developed for critical control devices and systems that must function flawlessly in a wide variety of corrosive environments. A number of alloys are commercially available for this type of service, but many demonstrate limited resistance.

  • Interstitial Fe-Cr alloys: Tuning of magnetism by ...

    the present work we consider an alloy Fe-Cr. The alloys of Fe and Cr, doped by C, Ni and by other elements, are widely used as basic components for ferritic and marten-sitic steels. Substitutional alloys of Fe and Cr have at-tracted much attention of theory and experiment due to their rich magnetic properties characterized by local an-

  • Nickel Iron Alloys Soft Magnetics Arnold Magnetic ...

    Nickel iron alloy soft magnetic materials used for efficient energy storage transfer, include Invar 36 for OLED and other applications. Precision rolled Nickel-iron is a premium low core loss material used in devices such as transformer cores, toroids, sensors, motor laminations, watch springs, flapper valves.

  • Properties of soft magnetic Fe-Co-V alloy produced by ...

    The purpose of this paper is to report on the developments in manufacturing soft magnetic materials using laser powder bed fusion (L-PBF).,Ternary soft magnetic Fe-49Co-2V powder was produced by gas atomization and used in an L-PBF machine to produce samples for material characterization. The L-PBF process parameters were optimized for the material, using a design of experiments approach.

  • High-entropy Alloys with High Saturation Magnetization ...

    Mar 15, 2013  The newly-developed high-entropy alloys (HEAs) are receiving much attention for their unique structures and excellent properties 1,2,3,4,5,6,7,8,9,10.Unlike traditional alloys

  • Metallurgical Materials Science and Alloy Design - Soft ...

    Soft magnetic alloys are materials that are amenable to easy magnetisation and demagnetization. Soft magnetic materials therefore are typically characterized by an intrinsic coercivity below 1000 Am-1. They are used primarily to enhance and/or channel the flux produced by an electric current. The main parameter which often serves as a figure of ...

  • Parmanand SHARMA PhD Physics Tohoku University, Sendai ...

    Development and magnetic properties of an alloy that can change from very soft to semi-hard magnetic are reported. We found that as quenched ribbons of Fe75.3Pt8B12P4Cu0.7 alloy are amorphous by X ...

  • Properties of soft magnetic Fe-Co-V alloy produced by ...

    The purpose of this paper is to report on the developments in manufacturing soft magnetic materials using laser powder bed fusion (L-PBF).,Ternary soft magnetic Fe-49Co-2V powder was produced by gas atomization and used in an L-PBF machine to produce samples for material characterization. The L-PBF process parameters were optimized for the material, using a design of experiments approach.

  • High-entropy Alloys with High Saturation Magnetization ...

    Mar 15, 2013  The newly-developed high-entropy alloys (HEAs) are receiving much attention for their unique structures and excellent properties 1,2,3,4,5,6,7,8,9,10.Unlike traditional alloys

  • Metallurgical Materials Science and Alloy Design - Soft ...

    Soft magnetic alloys are materials that are amenable to easy magnetisation and demagnetization. Soft magnetic materials therefore are typically characterized by an intrinsic coercivity below 1000 Am-1. They are used primarily to enhance and/or channel the flux produced by an electric current. The main parameter which often serves as a figure of ...

  • Parmanand SHARMA PhD Physics Tohoku University, Sendai ...

    Development and magnetic properties of an alloy that can change from very soft to semi-hard magnetic are reported. We found that as quenched ribbons of Fe75.3Pt8B12P4Cu0.7 alloy are amorphous by X ...

  • Controlled Expansion Alloys Magnetic Alloys Wire Rods

    Magnetic Alloys Wire Rods. For other grades formats made in Imphy, contact us. Aperam Alloys Imphy BP1 58160 Imphy ... Sealing with soft glass N42 LC 1.3917 <0.01 41--<0.2 1 Bal. FeNi-55 45 44 45 60-78-90 330 63 0.125 550 Sealing with soft glass ... FeCr (-89) 95 98 102 106 111 114 570 65 0.121 580 Glass sealing N485 2.4486 <0.01 48-5 <0.5 Bal ...

  • Titanium Grades Information - Supra Alloys

    Ti 6Al-4V (Grade 5) Known as the “workhorse” of the titanium alloys, Ti 6Al-4V, or Grade 5 titanium, is the most commonly used of all titanium alloys. It accounts for 50 percent of total titanium usage the world over. Its usability lies in its many benefits. Ti 6Al-4V may be heat treated to increase its strength.

  • New Fe‐based soft magnetic alloys composed of ultrafine ...

    The magnetic properties of Fe‐Si‐B‐M (M: additives) alloys prepared by annealing amorphous alloys made by the single roller method over their crystallization temperature have been investigated for development of new Fe‐based soft magnetic alloys. Excellent soft magnetic properties were obtained by adding the two elements Cu and Nb to Fe‐Si‐B alloys.

  • Soft Magnetic Nickel-Iron Alloys Manufacturer-HSM

    Soft magnetic Alloy 53: Softmag 53 alloy has high magnetic permeability and moderate saturation. 53 is a vacuum melted nickel-iron alloy providing high induction at saturation with fine permeability. Transformer cores, differential detectors, toriods, sensors, motor laminations, valves and different shielding operations. Soft magnetic Alloy 76

  • Selection and design of soft magnetic materials for ...

    The materials (such as soft ferrites and Fe-Ni alloys) with square hysteresis loop are used in computers and in magnetic amplifiers and other ‘saturable-core’ devices. The microwave system components comprise soft ferrite and garnets. Thus, soft magnetic materials play a key role in power distribution, and make possible the conversion

  • Soft Magnetic Alloys . Com

    Magnetic alloys. Magnetic alloys are alloys engineered to have special magnetic properties. Permalloy. Permalloy is the term for a nickel iron magnetic alloy.Generically, it refers to an alloy with about 20% iron and 80% nickel content.Permalloy has a high magnetic permeability, low coercivity, near zero magnetostriction, and significant anisotropic magnetoresistance.

  • Zirconium Manufacturers Suppliers, China zirconium ...

    Thermostatic Bimetal Strip , Welding Wire , Soft Magnetic Alloys , Resistance Alloy , Magnesium Alloy Plate Mgmt. Certification: ISO 9001, ISO 9000, ISO 14001, ISO 14000, QC 080000

  • Magnetic and Thermoelectric Properties of Fe–Ti–Sn Alloys ...

    Abstract: The magnetic and thermoelectric properties of Fe 3-x Ti x Sn (x = 0-1) alloys were investigated. The Fe 3-x Ti x Sn (x = 0.5-1) alloys consisted of the Fe 2 TiSn Heusler phase, while the Fe 3-x Ti x Sn (x = 0-0.25) alloys contained the Fe 3 Sn phase together with the FeSn 2 3-x Ti x Sn (x = 0.5-1) alloys consisted of the Fe 2 TiSn Heusler phase, while

  • Titanium - Wikipedia

    Titanium is a chemical element with the symbol Ti and atomic number 22. It is a lustrous transition metal with a silver color, low density, and high strength. Titanium is resistant to corrosion in sea water, aqua regia, and chlorine.

  • CUNRUI METAL JIANGSU CUNRUI METAL PRODUCTS CO.,LTD

    Monel K-500/UNS S05500/2.4375 nickel alloy sheet/plate. Monel k-500/UNS N05500/2.4375 alloy steel bar/rod ... Expansion Alloy 4J36 Steel pipe. Nimonic 80A steel pipe/tube. Soft Magnetic Alloy 1J50 steel bar/rod. Hastelloy alloy C276 Steel bar/rod. Hastelloy B-3 nickel alloy hex steel Bar. UNS N10665 Hastelloy B-2 Nickel Alloy Bar. Hastelloy X ...

  • High Temperature Alloy GH3030 GH30 XH78T Nickel Alloy ...

    High temperature alloy GH3030 GH30 XH78T Nickel alloy sheet/plate (Common Name: GH30, ЭИ435, XH78T) GH3030, solid solution strengthened superalloy with simple chemical composition, satisfactory thermal strength and high plasticity below 800 ℃, and good performance in oxidation resistance, thermal fatigue, cold stamping and welding process.It is monocrystalline austenite structure after ...

  • Titanium-Grade 5 (3.7164/65), R56400 Datasheet METALCOR

    Ti-Grade 5; Titanium - 6%Al - 4%V More than 50 % of titanium products worldwide are made from this alloy, either by casting or using a powder metallurgical or a hot forming process. The properties of the diverse product forms depend on the chemical composition and the thermo-mechanical process used. The alloy is generally used in its mill-annealed (= soft annealed) condition, which yields ...

  • Publication - Advanced Materials Processing Lab

    144. The Effect of Ni, Ce Addition and Extrusion Temperature on Al-Si Alloy, T.H. Lee, S.J. Hong, Journal of Korean Powder Metallurgy Institute, 11 (2004) 1-9 (Domestic) 145. Hardness Behavior of the Partially Crystallized Amorphous Al86Ni9Mm5 Alloys, T.S Kim, S.J Hong, B.T Lee, Materials Science and Engineering a, 363 (2003) 81-85 146.

  • thermal processing of magnetic materials - IOPscience

    The RTMA with its inherent low thermal budget has promising applications for processing soft magnetic materials for high-density magnetic data storage. Additionally, the magnetoimpedance effect of soft magnetic FeNi-based alloy (Ni 77 Fe 14 Mo 5 Cu 4) prepared by sputtering and RTP under a magnetic field has also been reported . An induced ...

  • 75Cr1 Steel Chemical composition, Metal Properties ...

    75Cr1 can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc. TEL:+86-13880247006 E-mail: [email protected]

  • Bal-tec - Ball Material Selection

    If it is a ball bearing application, the most likely material is chrome steel which is 52100 chrome alloy steel. This is a relatively inexpensive material. This material is very hard, at about 62 HRC (Hardness on the Rockwell "C" scale). It is highly magnetic. It is not corrosion resistant, it will rust easily.

  • Properties: Titanium Alloys - Ti6Al4V Grade 5

    Ti6Al4V is an alpha-beta alloy and the most widely used of all the titanium alloys. Ti6Al4V ELI is also briefly described. The composition, physical and mechanical properties and fabrication details are provided. A comprehensive data sheet is also attached.

  • Materials and Design

    plate and increases with diffusion time extension, reaching 70 – 80 dB at the frequency of 30 KHz – 1.5 GHz. ... such as Ti–Al 3Ti and Ni–Al ... Fe–Al soft magnetic alloy with low Al ...

  • Titanium in Dentistry: Historical Development, State of ...

    Oct 20, 2012  Titanium is a versatile material utilized in several areas such as: engineering, chemical industry (due to its corrosion resistance and chemical attack), naval industry (used in submarine equipments and to desalinate sea water), nuclear industry (used in the fabrication of heat recuperators in nuclear energy power stations), and war industry (fabrication of missiles and weapons).

  • Superalloy Ni-Cr Based Alloy Gh3030 Round Bar ...

    Superalloy Ni-Cr Based Alloy Gh3030 Round Bar (Common Name: GH30, ЭИ435, XH78T) GH3030, solid solution strengthened superalloy with simple chemical composition, satisfactory thermal strength and high plasticity below 800 ℃, and good performance in oxidation resistance, thermal fatigue, cold stamping and welding process.It is monocrystalline austenite structure after solution treatment, and ...

  • Titanium Alloys - Physical Properties

    Apr 02, 2002  As may be expected from this, electrical resistivity is relatively high. Specific heat does not show any obvious trend, ranging from about 400 to 600 J.kg-1.K-1. Magnetic Properties. Commercially pure titanium and all the titanium alloys are non magnetic. The permeability of commercially pure titanium is 1.00005-1.0001 at 955 H.m-1. Elastic Modulus

  • Unusual implant-related soft tissue reaction presenting as ...

    Jun 13, 2014  Jacobs JJ, Skipor AK, Black J, Urbam RM, Galante JO. Release and excretion of metal in patients who have a total hip replacement component made of titanium-base alloy. J Bone Joint Surg. 1991; 73-A:1475–1486. Bresson-Hadni S, Humbert P, Paintaud G,

  • Hardox® wear plate- Wear and abrasion resistant steel - SSAB

    Hardox® wear plate is the world's leading abrasion-resistant (AR) steel. Hardox® is hard through and through, from the surface deep down to its core, giving you extended service life and high productivity in the most challenging environments.

  • X6CrNiMoTi17-12-2 / 1.4571 - SteelNumber - Chemical ...

    Ti = 5 * C to 0.7 Particular ranges of sulphur content may provide improvement of particular properties. For machinability a controlled sulphur content of 0.015 % to 0.030% is recommended and permitted. For weldability, a controlled sulphur content of 0.008 % to 0.030 % is recommended and permitted.